Li-screw jacks tsa INKOMA SSP li ncha ka ho felletseng 'me li etselitsoe litlhoko tse thata tsa mechini ea sejoale-joale ea pampiri le libaka tse joalo tse senyang. SSP e ipapisitse le khiti e tloaelehileng, e ka kopanngoang ka mochini ho etsa lethathamo ho fihlela bokhoni bo hlokahalang ba sistimi. SSP e boetse e loketse haholo liindasteri tsa ho lokisa lijo, libaka tsa bopaki ba ho phatloha, limela tsa ho hloekisa lik'hemik'hale le petroleum.
Likaroloana:
- Phatlalatso e Range: 15 t ho 25 t (5,000 lik'hilograma ho 25,000 lik'hilograma)
- Boholo: boholo ba 4 bo fumaneha ka matla a ho phahamisa ho tloha ho 50 kN ho isa ho 250 kN
- Lebelo la ho khanna: Ho fihlela ho 1500 rpm
- Mofuta oa Screw: Sekurufu sa mochini oa trapezoidal se itšebetsang, se entsoeng ka tšepe e sa hloekang ea boemo bo holimo
- Ho Holisa Motlakase: Flange ea kantle ea enjene e nang le geometry e tiileng e tiileng, e tsamaellanang le bahlahisi ba Europe
- Likarolo tsa Moqapi:
- Bolulo: Moralo o ntlafalitsoeng oa FEM o nang le li-brackets tse kopaneng tsa cast swivel
- Tšireletso: Hlooho e entsoe ka mochine ho hokela bootle bo sireletsang
- Lubrication: Lubrication ea boleng bo holimo
- Likarolo tsa Gear: Likhetho tse peli - "N" e tloaelehileng le "L" e liehang.
- Tšebelisano: E ka fapanyetsanoa le li-screw jacks tse ling tsa metric steel worm worm
- Therisano: Meralo ea tloaelo le lipuisano le baenjiniere bakeng sa litlhoko tse ikhethang
Sistimi ena e kopanya lisebelisoa tsa boleng bo holimo, moralo oa sejoale-joale, le ho feto-fetoha ha maemo bakeng sa lits'ebetso tse fapaneng tsa indasteri.
| Boholo (SSP) | 5.1 | 15.1 | 20.1 | 25 | |
| Max. matla a ho phahamisa a dynamic/static | [kN] | 50/75 | 100/150 | 200/200 | 250/250 |
| Max. tensile load dynamic/static | [kN] | 50/75 | 99/99 | 178/200 | 250/250 |
| Screw Tr | 40x7 | 60×12 | 70×12 | 90×16 | |
| Karolelano N | 6:1 | 7 2/3:1 | 8:1 | 10 2/3:1 | |
| Phahamisa ka phetohelo bakeng sa karo-karolelano ea N | [mm/ka rev.] | 1.167 | 1.565 | 1.5 | 1.5 |
| Karolelano L | 24:1 | 24:1 | 24:1 | 32:1 | |
| Phahamisa ka phetohelo ka karolelano L | [mm/ka rev.] | 0.292 | 0.50 | 0.5 | 0.5 |
| Max. drive capacity2) ho T = 20 °C Potoloho ea mosebetsi (ED) 20 %/h | [kW] | 1.15 | 2.7 | 3.8 | 5 |
| Max. drive capacity2) ho T = 20 °C Nako ea mosebetsi (ED) 10 %/h | [kW] | 1.9 | 3.85 | 5.4 | 7.2 |
| Screw performance rating | [%] | 36.5 | 39.5 | 37.5 | 36.5 |
| Kakaretso e sebetsang hantle bakeng sa karo-karolelano ea N | [%] | 24 | 27 | 24 | 22 |
| Kakaretso e sebetsang hantle bakeng sa karo-karolelano ea L | [%] | 16 | 17 | 17 | 15 |
| Screw torque ka max. matla a ho phahamisa | [Nm] | 153 | 702 | 1061 | 1725 |
| Max. torque e lumelletsoeng ea drive-shaft | [Nm] | 92 | 195 | 280 | 480 |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 1 | [kg cm2] | 2.234 | 5.256 | 11.93 | 23.42 |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 2 | [kg cm2] | 2.273 | 5.356 | 12.14 | 23.74 |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 1 | [kg cm2] | 1.696 | 4.081 | 9.427 | 19.59 |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 2 | [kg cm2] | 1.699 | 4.091 | 9.451 | 19.62 |
| Thepa ea matlo | 1.4552 | ||||
| Boima ntle le stroke bolelele le tube ea tšireletso | [kg] | 16.2 | 26.5 | 36 | 70.5 |
| Screw boima ho 100 mm stroke | [kg] | 0.82 | 1.79 | 2.52 | 4.15 |
| Bongata ba mafura ka lisebelisoa tsa liboko | [kg] | 0.35 | 0.9 | 2 | 1.3 |
