INKOMA SHG Quick lifting screw jack e tsebahala ka ts'ebetso ea eona e matla le ho tšoarella nako e telele, e leng se etsang hore e be khetho e holimo bakeng sa bareki ba hlokang ts'ebetso e phahameng le bophelo bo bolelele ba ts'ebeletso. E fumaneha ka boholo bo mene, e akaretsa mefuta e fapaneng ea meroalo ho tloha ho 1.5 t ho isa ho 9 t mme e loketse lits'ebetso tse hlokang ho jarolloa ka matla le li-cycle tse atolositsoeng tsa mosebetsi.
Likaroloana:
- Matla a ho Phahamisa: 15 kN ho isa ho 90 kN
- Lebelo la Drive: Lebelo la ho kenya le fihla ho 3000 rpm
- Mofuta oa Screw: Sekurufu sa ho notlela sa trapezoidal (sekoahelo sa bolo se fumaneha)
- Lubrication: Arola li-circuits tsa lubrication bakeng sa ts'ebetso e ntle
- Sekurufu sa mochini se tlotsang mafura
- Lisebelisoa tsa bevel tse nang le lubrication ea ho hlapa ka oli
- Likarolo tsa Bevel Gear: E fumaneha ka tekanyo ea 2:1 le 3:1
- Durability: Li-gear le li-shafts tse thata-thata le li-bevel tse fatše
- Katleho: Helical spiral tooth bevel gears e fana ka lebelo le phahameng la ho phahamisa, ts'ebetso e ntle haholo, le bophelo bo bolelele ba ts'ebeletso.
Letoto la INKOMA SHG le fana ka motsoako o phethahetseng oa lebelo, ho tšoarella, le ts'ebetso e matla, e etsang hore e loketse liindasteri moo ho hlokahalang ts'ebetso e phahameng le ts'ebeliso khafetsa.
| Boholo (SHG) | 15 | 25 | 50 | 90 | |
| Max. matla a ho phahamisa a dynamic/static | [kN] | 15 | 25 | 50 | 90 |
| Max. tensile load dynamic/static | [kN] | 15 | 25 | 50 | 90 |
| Screw Tr | 24×5 | 35x8 | 40x7 | 60x9 | |
| Karolelano N | 2:1 | ||||
| Phahamisa ka phetohelo bakeng sa karo-karolelano ea N | [mm/ka rev.] | 2.5 | 4 | 3.5 | 4.5 |
| Karolelano L | 3:1 | ||||
| Phahamisa ka phetohelo ka karolelano L | [mm/ka rev.] | 1.66 | 2.67 | 2.33 | 3 |
| Max. drive capacity2) ho T = 20 °C Potoloho ea mosebetsi (ED) 20 %/h | [kW] | 1 | 1.5 | 2.4 | 8.9 |
| Max. drive capacity2) ho T = 20 °C Nako ea mosebetsi (ED) 10 %/h | [kW] | 1.3 | 2.6 | 3.8 | 13 |
| Lintlha tsa bokhabane | [%] | 41 | 43 | 37 | 33 |
| Screw torque ka max.matla a ho phahamisa | [Nm] | 29.4 | 73.2 | 123.4 | 398.5 |
| Max.e lumelletsoe ho khanna-shaft torque | [Nm] | 50 | 125 | 175 | 1600 |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 1 | [kg cm2] | 1.058 | 6.63 | 22.44 | 181.28 |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 2 | [kg cm2] | 1.079 | 6.79 | 22.89 | 184.92 |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 1 | [kg cm2] | 0.677 | 3.6 | 7.248 | 123.79 |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 2 | [kg cm2] | 0.691 | 3.67 | 7.393 | 126.28 |
| Thepa ea matlo | EN-GJL-250 | G-AlSi10Mg | EN-GJL-250 | ||
| Boima ntle le stroke bolelele le tube ea tšireletso | [kg] | 9 | 13.5 | 23 | 85 |
| Screw boima ho 100 mm stroke | [kg] | 0.8 | 0.59 | 1.5 | 2.5 |
| Bongata ba mafura ka lisebelisoa tsa liboko | [kg] | 0.15 | 0.9 | 0.6 | 3.5 |
