Li-Screw Jacks tsa INKOMA HSGK High Performance Screw Jacks li etselitsoe lits'ebetso tse boima, tse fanang ka nako e telele le ts'ebetso e ikhethang. Li na le li-lubrication tsa oli le li-fins tse pholileng, li-jacks tsena li netefatsa ts'ebetso e nepahetseng le tlas'a maemo a feteletseng. Ka thepa e matla ea ho haha le lisebelisoa tse khethiloeng ka hloko, li fana ka katleho e phahameng le nako e telele ea bophelo.
Lintlha-khōlō tsa Sehlahisoa:
- Boholo: E fumaneha ka mefuta ho tloha ho HSGK-3 ho ea ho HSGK-9
- Bokhoni ba Meroalo: E ts'ehetsa ka bobeli meroalo e hatellang le e thata ho fihla ho 1000 kN
- Lebelo la ho Kena: Ho fihla ho 3000 rpm
- Cooling Fins: Ho fokotsa mocheso o matlafalitsoeng bakeng sa maemo a feteletseng
- Lisebelisoa: Ntlo ea tšepe ea boleng bo holimo e boputsoa, lifahleho tse lokisoang hantle tse entsoeng ka mochini, sesupo sa boemo ba oli se kentsoeng morao, le screw ea moea.
- Mefuta ea Spindle: E fumaneha ka li-spindle tsa trapezoidal kapa ballscrew
- Li-Gears: Lebili la Worm le khannoang ke likere tse thata le tse fatše tse nang le geometry e ntlafalitsoeng
- Tšehetso: Li-roller tsa nale li tšehetsa meroalo ea radial holim'a spindle bakeng sa bophelo bo eketsehileng le ts'ebetso
- Likhetho tsa Moralo:
- Phetolelo e potolohang (R): E fana ka phahamiso e melang ka ho potoloha ha spindle, 'me spindle e tsitsitse.
- Phetolelo ea phetolelo (S): The spindle e tsamaea ka axially ho phahamisa mojaro, ka moeli oa maeto le thibelo ea ho potoloha e fumanehang liphetolelong tse kang SA.
Likaroloana:
- Mefuta e mengata ea lisebelisoa tse fumanehang bakeng sa ho ikhethela
- Ho kenya lebelo ho fihla ho 3000 r/min le bokhoni bo phahameng ba ho jara
- E etselitsoe bakeng sa meroalo e hatellang le e thata
Bakeng sa lipotso tse khethehileng, meralo e ikhethileng, kapa litlhoko tse ikhethang (mohlala, liphetolelo tse hananang le mafome kapa matlo a fetotsoeng), ho khothaletsoa ho buisana le sehlopha sa INKOMA ho lokisa sistimi ho latela litlhoko tsa hau.
| Boholo (HSGK) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| Max. matla a ho phahamisa a dynamic/static | [kN] | 25 | 50 | 100 | 200 | 350 | ka kopo | 1000 |
| Max. tensile load dynamic/static | [kN] | 25 | 50 | 100 | 178 | 350 | 1000 | |
| Screw Tr | 40x8 | 50x9 | 60×12 | 70×12 | 100×16 | 160×20 | ||
| Karolelano N | 6:1 | 7:1 | 8:1 | 8:1 | 10 2/3:1 | 13 1/3:1 | ||
| Phahamisa ka phetohelo bakeng sa karo-karolelano ea N | [mm/ka rev.] | 1.33 | 1.28 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Karolelano L | 24:1 | 28:1 | 32:1 | 32:1 | 32:1 | 40:1 | ||
| Phahamisa ka phetohelo ka karolelano L | [mm/ka rev.] | 0.33 | 0.32 | 0.375 | 0.375 | 0.5 | 0.5 | |
| Max. drive capacity2) ho T = 20 °C Potoloho ea mosebetsi (ED) 20 %/h | [kW] | 1.5 | 2.3 | 3.6 | 4.8 | 7.7 | 17.9 | |
| Max. drive capacity2) ho T = 20 °C Nako ea mosebetsi (ED) 10 %/h | [kW] | 2.6 | 4 | 6.3 | 8.4 | 13.5 | 31 | |
| Lintlha tsa bokhabane | [%] | 40 | 36.5 | 39.5 | 35.5 | 34 | 28.5 | |
| Screw torque ka max.matla a ho phahamisa | [Nm] | 80 | 190 | 478 | 1060 | 2600 | ka kopo | 11115 |
| Max.e lumelletsoe ho khanna-shaft torque | [Nm] | 48,7 | 168 | 398 | 705 | 975 | 4260 | |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 1 | [kg cm2] | 1.247 | 3.1 | 11.97 | 30.11 | 60.76 | - | |
| Motsotso o moholo oa inertia J Karolelano ea mofuta oa 2 | [kg cm2] | 1.364 | 3.378 | 13.05 | 32.21 | 65.76 | - | |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 1 | [kg cm2] | 0.638 | 1.804 | 8.13 | 20.91 | 44.88 | - | |
| Motsotso o moholo oa inertia J Karolelano L ea mofuta oa 2 | [kg cm2] | 0.645 | 1.822 | 8.2 | 21.04 | 45.43 | - | |
| Thepa ea matlo | EN-GJS-500-7(GGG50) | |||||||
| Boima ntle le stroke bolelele le tube ea tšireletso | [kg] | 13 | 25 | 47 | 74 | 145 | ka kopo | 870 |
| Screw boima ho 100 mm stroke | [kg] | 0.82 | 1.3 | 1.79 | 2.52 | 5.2 | 13.82 | |
| Bongata ba mafura ka lisebelisoa tsa liboko | [kg] | 0.4 | 0.9 | 1.5 | 2.1 | 5 | 15.5 | |
